This is an open wiki that thrives through user contributions. A good way to stay informed on what's going on and to get useful tips in using Malyan Printer is subscribing to the newsletter.

Of course we'd be more than happy to have you getting involved.

Malyan System is a China-based company founded in 2012 producing 3D printers. Malyan builds on the early progress of the Replicator and RepRap Project.

Due to the popularity of the 3D printers, there are several different products out there.

Classic wood frame model.

Wood model

Wood model ¹⁾

Metal frame model.

Metal frame model. Large version of M180.

Metal frame smart printer model.

* All preliminary parameters above may subject to change without notice.

Economy metal structure 3D printer. Prusa i3 compatible with Marlin firmware. Plain GCode is directly supported.

Metal frame smart printer model with wifi using latest MM32-series motherboard.

Economy metal structure 3D printer. Marlin instruction set compatible firmware. Plain GCode is directly supported.

Economy metal structure 3D printer. Marlin instruction set compatible firmware. Plain GCode is directly supported.

Drvier:

• INF Driver for Windows

Apps:

• Android app: Beta version for testing ~~BARCODE~id=css_id~class=css_class~mode=0~size=S~caption=x~url=http://goo.gl/9LIlVF~~
• Desktop app: Create virtual comport COM100 to access though wifi. Beta version for testing

Note:

• Wifi and USB cannot access simultaneously. Please disconnect USB from printer if you want to use wifi function.

Wifi usage(Method A) https://youtu.be/XuO_UaUFlBI:

1. Update to latest firmware. 
2. Press and holding center button on "Move" menu will enter config status. Release button when smart config dialog show. Run android app to config wifi. 

Wifi usage(Method B):

1. Using command "M550 SSID" & "M551 PASSWORD" to enter AP information though terminal. 
2. You will see IP show up in title bar. 

Access though web browser:

• Check IP address displayed on LCD, copy this address to web browser in computer.

• Cura setting for M200
• Type of thermistors of M200
• Tune PID
• LCD UI corrupted.
• Invert motor direction
• Changing parameters
• Sample code for web interface
• Extended gcode table
• Temperature display 353C
• Cura 2.3 USB Printing

• Motion controller
• UI controller

• M200 SDCard content
• M320 SDCard content

Update method:

Copy update.bin to clean formatted microSD card. Create empty file named “fcupdate.flg”. Insert card and power on printer to update.

Copy lcd.bin to clean formatted microSD card. Move extruder head to trigger both X&Y. Power on printer with holding button of wifi module(center button for M200), if extruder fan start to turn indicate update started. Please wait 2 minute for update then fan will stop.

Latest UI controller no longer support microSD card flash. Please upload firmware using browser.

Note: lcd.bin is use for card update only. DO NOT upload lcd.bin though browser, it will brick your machine. Latest firmware is in different file format.

This interface is designed by Jason Jones, thanks very much for his work.

To change original web UI, upload html file using browser to the 3rd upload box in address: http://printer_address/up

link

- Press the button will automatically start print file(file name should start with auto, Ex: auto00.g) on SD card.

- Press the button while printing will pause, press again will resume.

- Press and holding the button for 4 seconds while printing will cancel the job.

- Press and holding the button for 4 seconds in idle state will initial WIFI smart config. This function is the same as M200. Please check attachment video for configuration WIFI.

• Cura 15 for M150
• Slic3r for M150
• Repetier-host

• ReplicatorG
• Makerware (Added support for Makerware 3.7 and up)
• Simplify3D
• Cura
• Cura 15
• Cura 2.0 beta (Latest)
• Slic3r

If your slice software is not on this list, you can modify profile by yourself.

• Start.gcode
• GPX for translate gcode into x3g file

• Openbox and setup
• Install filament
• Install platform / Apply platform tape
• Adjust platform
• Test print
• Using slicing software
• The operation method of dual nozzle calibration
• User manual

• How do I use my Dual Extruders?
• How to change the Heated Build Platform Temperature?
• How to calibrate my printer?
• The belt is too loose/tight, how to fix?
• How to clear EEPROM to factory state?
• Why Z-axis have offset when start print?
• Is there a nozzle cooler on M180?
• Dual-extrusion calibration pattern have no match column/row.
• Access denied when open STL file in ReplicatorG.
• Can I increase heat bed output watt?
• How to change steps per mm parameter?
• How to change PID for M180?
• How to clean M150 extruder?

Only for professionals, please do not proceed unless you know what you are doing.

• Changing belt
• X/Y Axis not moving
• Some mechanic parameters
• Stepper motor parameters
• Filament funnel extender MOD
• Bearing list of M180
• Video for replacement of component
• Nozzle diameter
• Open bottom cover
• M200 display "Please wait"

• My SD card is not compatible to M180
• Error message from Makerware
• Cura is printing using left extruder or not extruding
• Cura is not able to save as X3G format
• Cura is not able to set platform temperature correctly
• Selected left extruder but temperature not raising or cold extrusion
• ABS printed object warp in corner
• LCD no display on M150

• Acrylic cover for M180
• Y-axis extension kit for M150

Problem	Picture	Solution
X/Y scaling wrong		Recalibrate X/Y axis scale
Shifted layers		Shifted layers
Skipping Steps		Printing speed too fast or nozzle hit the warped model
Corner ringing		Appears as ripples which rapidly diminish in amplitude
Dual extrusion offset		ReplicatorG tool change command bug fix
Layer shifts on X-axis		1. Glass is loose or glass installed at wrong side. 2. End-stopper triggered by noise. Always shift to left side. 3. Cool nozzle hit wrapped corner. Heat up both extruder can help. 4. Too fast printing speed. Please slow down to 50% to test.

ref

!!! Please note, improperly update firmware may cause machine brick. Do at your own risk!

Check github for stable source code: https://github.com/MalyanSystem

To burn customized code, please reference command:

avrdude -F -V -p m2560 -P COMX -c stk500v1 -b 57600 -U flash:w:filename.hex

• Motherboard connection diagram
• Firmware update procedure
• Work with MacOSX
• Calibration for slicer
• Unlock some limit parameters of printer
• Cura always crash after loading STL file
• Enable PWM feature for cooling
• Utility to test COM port
• Developer guide for MM32 platform