User Tools

Site Tools


cura_is_printing_using_left_extruder_or_not_extruding

Make sure CURA 15.06 is download from link: http://wiki.malyansys.com/doku.php?id=cura_15

Follow below procedure to reset settings: http://wiki.malyansys.com/doku.php?id=how_to_clear_eeprom_to_factory_state

Uninstall original CURA and install again. If problem remain, please report to our support email.

cura_is_printing_using_left_extruder_or_not_extruding.txt · Last modified: 2019/03/20 04:21 (external edit)