why_z-axis_have_offset_when_start_print
The problem is caused by wrong feedrate of Z-axis or wrong resolution Z-axis screw (1600 steps/mm).
To solve this problem, please reset eeprom and try updated Makerware in our website: http://malyansys.com/support/download/
Or modify Z-axis feedrate for slicer manually.
Makerware users: Please check this link for latest Makerware support.
why_z-axis_have_offset_when_start_print.txt · Last modified: 2024/10/31 15:26 by 127.0.0.1