Malyan Community

ABS have more shrinkage than PLA. If you have thick corner on your model, the material have internal force to warp. There are some technic to solve this problem:

1) Changing to PLA is the easiest way to solve this problem.

2) Add a thin extension pad around the corner can increase stickiness to the platform.

3) Reduce thickness of corner, ex: add hole on thick wall.

4) Reduce distance between nozzle and platform, heat platform to 85C degree. To increase stickiness.

Reference for advance user: Increase heat bed output power

Navigation
Print/export
QR Code
QR Code abs_printed_object_warp_in_corner (generated for current page)