This shows you the differences between two versions of the page.
lcd_no_display_on_m150 [2019/03/20 04:21] |
lcd_no_display_on_m150 [2019/03/20 04:21] (current) |
||
---|---|---|---|
Line 1: | Line 1: | ||
+ | 1. Open control box, double check connection on LCD module. | ||
+ | |||
+ | 2. Make sure the resistor on back is adjusted to correct contrast. | ||
+ | |||
+ | 3. Connect to USB and send some gcode to check firmware if system is up. | ||
+ | |||