User Tools

Site Tools


abs_printed_object_warp_in_corner

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
abs_printed_object_warp_in_corner [2015/12/07 04:20]
admin created
abs_printed_object_warp_in_corner [2019/03/20 04:21] (current)
Line 1: Line 1:
 +ABS have more shrinkage than PLA. If you have thick corner on your model, the material have internal force to warp. There are some technic to solve this problem: ​
  
 +1) Changing to PLA is the easiest way to solve this problem. ​
 +
 +2) Add a thin extension pad around the corner can increase stickiness to the platform. ​
 +
 +3) Reduce thickness of corner, ex: add hole on thick wall. 
 +
 +4) Reduce distance between nozzle and platform, heat platform to 85C degree. To increase stickiness. ​
 +
 +Reference for advance user: [[can_i_increase_heat_bed_output_watt|Increase heat bed output power]]