** !! NOTE: If you are using latest firmware, Makerware 3.7 is NO LONGER need to patch. Please update firmware to latest and reinstall Makerware 3.7 !! **


===== Latest Makerware (3.8) =====

Same as Makerware 3.7, if found problem please report to support email. 



===== Makerware 3.7 =====

Latest Makerware change start gcode. There is two solutions to make M180 compatible to Replicator Dual: 

!!NOTE: New machine come with latest Makerware 3.7 compatible firmware. !!

<del>
1. Patch solution: Download [[http://malyansys.com/downloads/Makerware-3.7.0.108-M180.zip|patch]] for latest Makerware (3.7). Unzip file and overwrite Makerware program files. Remember reboot to take affect of the modification. 
</del>

2. Firmware solution: Latest M180 (after Aug-2015) support X3G generated by Makerware 3.7. If you purchase M180 before this date, please update firmware using this link. [[Firmware update procedure]]


===== Earlier Makerware =====

<del>Makerware is supported for Malyan 3D Printer. </del>
<del>If print through SD card, please select "Replicator Dual" profile. </del>
<del>If print through USB, additional USB driver and patch is required. </del>

<del>===== USB Driver and patch for USB =====</del>
<del>Please download driver and patch for Makerware</del>

<del>==== Windows ====</del>

<del>=== Special thanks to 3d-ua for his perfect work! ===</del>

  * <del>http://malyansys.com/downloads/CH341SER.EXE</del>
  * <del>[[http://malyansys.com/downloads/MakerBot-3.4.1.48.zip|Support for MakerBot Desktop 3.4.1.48]]</del>
  * <del>[[http://malyansys.com/downloads/MakerBot-3.4.1.48-r2.zip|Support for MakerBot Desktop 3.4.1.48 R2]]</del>

<del>Download the version from makerBot & replace the files with patched ones</del>

<del>==== MacOSX ====</del>
<del>Please reference to: [[macosx|Support for MacOSX]]
</del>