===== M150 =====

Download: 
  * [[http://malyansys.com/download/firmware-m150.rar| Firmware for M150]] (updated at 2016-4-18)

Note: Two firmware available for M150, user can choose Repetier-firmware or Marlin

Firmware updater usage:
  - Power off printer.
  - Press center button on panel.
  - Power up printer, please keep center button pressed.
  - Release center button.
  - Look up COM port from windows device manager. Type below command into windows console: avrdude.exe -v -p atmega1284p -c arduino -P com4 -b 57600 -V -U flash:w:marlin.hex
  - Reboot printer if necessary.

Source Code:

  * All open source code is in Malyan System official github: [[https://github.com/MalyanSystem/Malyan-M150-Marlin]]


===== M180 =====

==== Motion Controller ====
Firmware updater usage:
  - Power off printer.
  - Press center button on panel.
  - Power up printer, please keep center button pressed.
  - Release center button.
  - Look up COM port from windows device manager. Type below command into windows console(Require administrator privilage): update.exe -P COM4
  - Reboot printer if necessary.

Download：
   * [[http://malyansys.com/download/up.exe| Latest Firmware for M180]] (updated at 2015-7-26), enhance support for Makerware 3.7
   * [[http://malyansys.com/download/update-M180.exe| Firmware for M180]]
   * [[http://malyansys.com/download/update-M180-OEM.exe| OEM version firmware for M180]]
   * [[http://malyansys.com/download/update-W150.exe| Firmware for W150]]

==== GUI ====
GUI update procedure:
  - Power off printer.
  - Press center button on panel.
  - Power up printer, please keep center button pressed.
  - Release center button.
  - Push center button again to switch to LCD update mode. 
  - Execute GUI_UPDATE.EXE, select UPDATE_S.bin and correct COM port.
  - Start update

GUI firmware download link：

   * [[http://www.malyansys.com/download/GUI_UPDATE.EXE| GUI_UPDATE]]
   * [[http://www.malyansys.com/download/UPDATE_S.bin| LCD Firmware for M180]]

==== Experimental firmware ====

!!Please note, experimental firmware is only for testing purpose!!

Some users have difficulty with avrdude, please choose m2560 part and stk500v1 programmer in command line. 

Reduced cooling fan speed for ABS: 
   * [[http://malyansys.com/download/exp20151102.exe| Experimental Firmware for M180]] (updated at 2015-11-2)

Marlin firmware, accept plain text GCode:
   * [[http://malyansys.com/download/exp20151214.exe| Experimental Marlin Firmware]] (updated at 2015-12-14) First port of Marlin
   * [[http://malyansys.com/download/exp20160103.exe| Experimental Marlin Firmware]] (updated at 2016-01-03) Changed default parameters, enabled EEPROM support.