Windows 10 with Makerware 3.7 is supported. 

Please make sure Makerware is cleanly installed, NO PATCH NEEDED. If you are not sure, please reinstall Makerware. 

If you encounter below problem, Ex: cannot slice at 0.1mm resolution, report to our support email: 

{{:err285a3756.jpg?400|}}

Please attach below information:

1) OS version

2) Makerware version and download link (or original setup file name)

3) Screen copy of error message

4) Original STL file

5) Slicing parameters, Ex: 0.1mm/High resolution